Oxygen Detector/Transmitter

oxygen detector/transmitter (electrochemical)  MIC-O2

一、overview
Smart transmitter MIC-O2 ,which adopt the most advanced and international standards VLSI technology,proprietary digital simulation of hybrid technology designed gas intelligent transmitter.Products is of Communication and self-diagnostic features, easy installation and maintenance, intelligent scene typical of the art instrumentation to monitor the performance of the full exhibition, meet    the need of on-site industrial safety monitoring equipment which is high-reliability requirements greatly, they are widely used in the environment Protection, test equipment,medical equipment, chemical and pharmaceutical industry applications

二、oxygen detector/transmitter features
1、The full realization of the two gas lines of the digital and intelligence transmitter
2、4 ~ 20mA signals and standard RS232 digital signal output, and communicate with computer in real-time
3、International standard smart sensors which is plug and play, on-site maintenance is very convenient
4、LCD backlight with a unique design technology, on-site observation equipment, maintenance is no longer affected by changes of the light .
5、full range of  figure compensation;
6~Flameproof transmitter can achieve three key free on-site configuration, such as view, setting and calibration.
7、safe type circuit and explosion-proof casing design, on-site maintenance is safe, convenient, fast
8、According to your application, the shell can be installed as a 360-degree rotation.
三、specification
1、electrochemical principle；
2、measure range：0～1000ppm；(Optional)
3、measure accuracy：±%F.S.
4、material of shell： Proof aluminum alloy shell
5、dimension：180×130×74，weight：1.8kg；
6、Flameproof rating ：Exd  IIC  T6；
7、Protection level：IP66；
8、Optional LCD display, including: the percentage of article 50 paragraph stick process, 5 8 digital measurements showed that 8 of 16 meters above the font message
9、LCD Display mode：mA；
10、work environment temperature：-20～50°C；
11、work environment humidity:10～95%RH 
12、analog signals output : Second-line system 4～20mA Linear output；
13、3.6mA Calibration output和 22.8mA Fault output
14、power supply :3.3mA(min),23mA(max),
24VDC(12～45VDC)；